New Product Releases - November

Rate this item
(0 votes)

 

The latest news and updates directly from mountune
THIS MONTHS NEW RELEASES
This month sees a selection of new products released across a range of models catering for ST, RS and Mustang owners. 
 
MK7 FIESTA ST
MR230 FOR ST200

Fiesta ST200 MR230 Upgrade

The mountune Racing MR230 upgrade offers Fiesta ST200 owners the chance to upgrade to a genuine 230PS and 340Nm experience - the highest power output reliably achievable using the OE turbocharger.

The kit consists of:

• Low-loss dual-entry airbox with secondary feed
• mountune high-flow panel filter
• High-flow 3" down pipe with 200-cell sports catalyst
• High-flow 2.5" bore cat-back exhaust
• High-flow charge pipe upgrade kit
• High-performance alloy intercooler (black finish)
• High-flow silicone induction hose
• mTune handset loaded with MR230 calibration.
• Optimised cam timing (via mountune timing tool - included)

Cam locking tool (to optimise cam timing)

Once upgraded, power increases to 230PS whilst torque is raised to 340Nm.

For owners that already purchased all the required hardware, an mTune-only version is also available, supplied with the cam timing optimisation tool.

Buy Now
 
MK7 FIESTA ST
 FRONT AND REAR GROOVED DISCS...

Fiesta ST Grooved Front and Rear Discs:

The mountune front and rear brake disc upgrades features a precision-machined 8-groove design to help deglaze the brake pad face and help promote even pad wear.

A direct replacement for Fiesta ST running the OE braking setup - Supplied as a pair.

• Grooved design improves performance 
• Direct replacement

Front Discs: Buy Now
Rear Discs: Buy Now
 
MK3 FOCUS ST
 FRONT AND REAR GROOVED DISCS...

Focus ST Grooved Front and Rear Discs

The mountune front and rear brake disc upgrades features a precision-machined 8-groove design to help deglaze the brake pad face and help promote even pad wear.

A direct replacement for Focus ST running the OE braking setup - Supplied as a pair.

• Grooved design improves performance 
• Direct replacement

Front Discs: Buy Now
Rear Discs: Buy Now
 
MK7 FIESTA ST
 EXHAUST ISOLATOR...

Fiesta ST Exhaust Isolator

The mountune uprated exhaust isolator helps ensure accurate alignment, particularly when attempting to DIY install the mountune cat-back exhaust, without proper access to the underside of the vehicle.

The isolator features a higher shore hardness that prevents movement of the rear resonator whilst transmitting minimal additional NVH into the cabin of the car.

Features:

  • Allows for easier DIY installation of cat-back exhaust
  • Minimises rear resonator movement
  • Uprated shore hardness
  • Minimal increase to NVH
  • Sized to fit and compliment the mountune cat-back exhaust hanger
Buy Now
 
MK3 FOCUS RS
 M380 DYNO MODE...

M380 DYNO MODE

Now available as part of all M380 upgrades and as a free update for all existing owners (via Access Port Manager), you can switch the RDU on and off from your mTune handset without having to touch, or do anything else!

With a sophisticated rear-split torque-vectoring system, the AWD system of the Focus RS can make being able to dyno your RS difficult, if not impossible. Our Dyno Mode fully disengages the interaction of the RDU (Rear Drive Unit) allowing power to be taken from the front wheels. This also means a 2WD dyno can be used if a 4WD dyno is not available.

Dyno Mode is accessed via: Calibrations > Adjustments  > Dyno Mode (On / Off)

 
MK3 FOCUS RS
 Bronze Leggera HLT

OZ Racing Leggera HLT "m-Spec" 8.5x19" wheel

Available exclusively to mountune, the bronze OZ Racing Leggera HLT wheel gives the discerning mk3 Focus RS owner the opportunity to upgrade their wheels to one of the lightest, strongest, and best looking on the market.

The mountune Leggera HLT features an ET45 offset, and boasts an additional 0.5" in width, whilst improving the appearance and facilitating more clearance for big brake kits.

The Leggera is, as the name suggests, seriously light in weight. 9.95kg in fact, which is over 1.7kg lighter than the factory forged option wheel and 2.8kg lighter than the standard RS wheel.

Features:

  • 8.5x19", 5x108
  • ET45 Offset
  • Lightweight - only 9.95kg per wheel!
  • 2.8kg lighter than the OE wheel | 1.7kg lighter than forged OE wheel
  • Hyper Light Technology - super light, super strong.
  • Exclusive high quality matt bronze colour finish
  • Unique mountune carbon centre cap
  • Each wheel is supplied with 5 McGard black wheel nuts
Buy Now
 
MUSTANG ECOBOOST
INDUCTION HOSE

Mustang EcoBoost Induction Hose

The mountune high-flow induction hose for the Mustang 2.3-litre EcoBoost has been engineered to increase air flow to the turbocharger, and replaces the restrictive factory hose between the air box and the turbocharger intake.

The mountune high-flow induction hose features stainless steel wire reinforced sections to prevent deformation under engine load and includes the fittings and take-off required for a direct swap for the OE hose.

Features:

  • Increased airflow
  • High quality silicone construction
  • Machined alloy insert allows easy installation 
  • Stainless steel wire reinforced to prevent deformation
  • Easy installation
  • Lifetime warranty
  • Hose available in Black, Blue, Red and Grey
Buy Now
 
PERFORMANCE AND FOCUS RS CATALOGUES NOW ONLINE... 
Performance Parts
Focus RS Performance Parts
 
Do you follow us on social media?... 
Facebook
Facebook
Twitter
Twitter
Instagram
Instagram
Website
Website
This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
 
Copyright © 2016 Mountune, All rights reserved.

Our mailing address is:
UK:  mountune | Prospect House | Prospect Way | Hutton | Essex | CM13 1XA
USA:  mountune LLC  |  1000 E Carson St.  |  Carson  |  CA 90745
Last modified on %PM, %28 %565 %2016 %12:%Oct

 Copyright ©2016 mountune