Wednesday, 23 March 2016 10:36

MOUNTUNE USA TO EXHIBIT AT FORD NATIONALS

mountune USA will be exhibiting at the Ford Nationals event in Carlisle, PA from June 3rd - 5th.  This event brings together owners and enthusiasts of Ford’s finest performance vehicles - and is actually the largest gathering of its type in the world! 
 
Together with our friends at Ford Performance, we’ll be showcasing some of our newest products, offering on-the-day show specials and will have a selection of our latest performance vehicles on display, featuring our most exciting upgrades and parts. Make sure it’s in your diary.
 
Published in Events
Monday, 15 February 2016 16:16

Toolbox: Installing a Focus Roll Restrictor

So you're either contemplating our new Focus Roll-Restrictor (RMM), or you may already have one, but you're unsure of how to install it? We've got you covered with our video installation guide.

We've shown how to install it on a Mk2 Focus ST in this video, but installation is almost identical across the models it's available for.

Want to get yours ordered? Head over to mountunestore.com or mountuneusa.com

Published in General News

Already we’re talking about Ford Fair and are pleased to announce that once again, mountune will be headlining Europe's biggest Ford event, being held at Silverstone on Sunday, August 7th.

In our 6th year of being headline sponsor, we’re upping our game and taking things one step further with a host of performance cars and famous faces on our stand and in action on the day, including former BTCC champion and Motorbase Performance / Pirtek Racing's Mr Andrew Jordan.

Phil Weeden, Kelsey Media MD stated, "We’re delighted to have mountune back on board as our headline sponsor for Ford Fair at Silverstone. It’s great to be partnering this event with a respected brand like mountune, which has justifiably earned its position as a market leading specialist in the Ford aftermarket”.

The headline sponsorship of Ford’s biggest European show will form part of a multi-year deal between mountune and Kelsey and will allow our marketing team to build on our existing success with even more exciting features and must-see additions to the show. 

Be sure to check back for the latest confirmed event details or to take advantage of the earlybird ticket offer, head over to the official FordFair website. 

Published in Events
Tuesday, 19 January 2016 15:57

FOCUS ST/RS MK2 SYMPOSER DELETE

Removing the sound symposer system is one of the first modifications you can make to your Mk2 Focus RS, and now, with the release of the mountune symposer delete, one of the easiest too.

Our in-house R&D department ensures that only the highest quality materials and fittings are used, allowing an easily accessible source for boost pressure, additional modifications, or engine monitoring, plus is easily installed and comes in a durable black anodized finish.

Priced at £28.00 Including VAT, the Focus ST Mk2 Symposer Delete is available to purchase now through the online store.

Published in New Products
Monday, 25 January 2016 20:46

Engineering an icon - Ep 1

What could be better than a Mk3 Focus RS development car you say? Well, two actually, and that's exactly what our engineering team have been using for more than six months to design, develop and validate our forthcoming range of performance parts and upgrade kits for Ford's latest AWD, RS-badge wearing Focus.

For all of our major MP (mountune Performance) upgrade programs we use Ford pre-production development cars, or mules as they're affectionately referred to as. These dev-cars might not look all that, but it's underneath, and what you can't see that's so special, as these are thoroughly re-worked to RS specification and fully instrumented. This provides the perfect platform to gain early access to the base vehicle calibrations via a development module and, gives us the opportunity to see how the powertrain functions and where we can make improvements for the aftermarket, as opposed to OE customer. Oh, and if you're sat there wondering, what on earth do we mean by fully instrumented, or development module, we'll cover both of those in more detail later.

DRIVEN, BY DATA
As with so many things, having rich data to work with is key, especially when you're talking about further increasing this high-output 2.3-litre turbocharged engine. The dev-module we use is fitted with a lead that links directly to a laptop running special software. This gives our calibration team complete, unparalleled access to the ECU. We can see everything the base calibration team at Ford can see, unlike any other aftermarket tuning system or company out there, so regardless of what you might've been told elsewhere, nobody else has this access.
The other thing that sets us apart is also having the strategy. The strategy tells the calibrator how each table interacts with one another, why variables are changed, and the knock-on effect this can have elsewhere in the calibration itself. Modern 'maps' have evolved into complex calibrations that require a great deal of knowledge to modify and optimise properly – it's not just a table for boost, ignition and fuel. Things are far, far more complex. The Focus RS base calibration, for example, has no less than 1400 different tables controlling everything from pedal maps to altitude-based correction offsets.

Therefore, it takes real understanding to manipulate a base calibration to reliably produce more performance, whilst maintaining drivability, fuel economy, refinement and in our case, your warranty!
We also mentioned earlier that these vehicles are fully instrumented. In order to meet our sign-off criteria we need to know what turbo speeds, in-cylinder pressures, engine revs and what a whole host of parameters being produced are, in order to remain within the required boundary conditions set out by Uncle Henry.
Pop the bonnet and you'll see a host of wires running throughout the engine linked to pressure transducers, thermocouples and more, all relaying this essential data back to modules and data loggers that can be used to view live, and compare recorded data. So in summary, all you really need is a dev-module that gives you complete access to all of the base tables, the strategy that tells you what each table does and the effect it has on all other tables, an instrumented engine and finally, a calibrator that knows what they're doing, TED (The Engineered Difference)... simple!


GOING WITH THE FLOW
Now that you're up to speed, it's time to share some more specific detail about the new Focus RS with the group and, as this is our first RS instalment we're going to take a look at one of the first modifications that will undoubtedly be made, the induction setup. As you've probably seen from all the press shots doing the rounds, the Focus RS uses a brand new, modified airbox setup, complete with an almost 'open' filter arrangement in the top. You'll notice it features some RS branding and a lattice design, but its main reason was to provide minimal pressure drops across the 'dirty' side of the air filter to the 'clean' side. A brand new intake tract then feeds the air across the engine bay and down to the turbo, similar to its Focus ST predecessor. Our development initially started with back-to-back sessions on our in-house flow bench, together with a host of air filter and intake options to find the best combination of parts to release additional induction noise, and further reduce any pressure drop across the intake system.

The easiest way to relate to what's trying to be achieved is if you were to put your hand across the end of a vacuum cleaner. With your hand across the nozzle (intake) it causes the engine (or vacuum) to work harder to try and draw in the same amount of air and maintain performance. Ensuring this intake has as little restriction as possible means your engine can work at its most efficient, either releasing additional power in the process, or, as in most cases, gaining some additional head-way back that can then be exploited, also giving more power and the same net-effect.
With some data to work with, development parts were fitted to one of our test cars to correlate our findings in-car and in the real world. This involves countless miles accumulating data logs under varying conditions and driving styles, before being further validated on a chassis dyno.
We know that in the course of time, a good number of RS owners will end up fitting a larger turbocharger and our complete intake also allows for this, as well as incorporating improvements in air-flow and an aesthetic enhancement, too.

Be sure to check back in with us for plenty of new Focus RS kit and product update blogs over the coming weeks.

The mountune induction kit will be available to purchase in March (subject to Focus RS being available) at both mountunestore.com and mountuneusa.com and from all mountune dealers and re-sellers.

Published in R&D
Wednesday, 20 January 2016 13:31

Focus Roll-Restrictor

Application list: Mk2 Focus ST, Mk2 Focus RS, Mk3 Focus 1.6 EcoBoost, Mk3 Focus ST
Price: £119 Inc. VAT

After an extensive period of R&D, mountune are pleased to offer an uprated roll-restrictor to their ever-growing Focus product line, compatible with a range of Mk2 and Mk3 Focus models.

Designed to reduce engine rock and prevent wheel hop under acceleration, this uprated unit is an essential addition for vehicles running increased power and torque, but is of equal benefit to cars running standard power levels, too. 

The body is manufactured from anodised HE30 grade aluminium and uses a bespoke size and shore hardness polyurethane bushing to control movement, whilst maintaining an acceptable level of NVH (Noise, Vibration, Harshness).

Available to purchase from all mountune PRO Ford dealers and re-sellers and online directly at mountunestore.com and mountuneusa.com

Published in New Products
Page 3 of 3

 Copyright ©2016 mountune